Vertical Blind Replacement Slats
$8.00
Vertical blinds come complete with top hanger and bottom weight ready to hang. All blind slats come with the standard chainless bottom weights. If you need chained bottom weights you will need to purchase the bottom weights and the chains separately from our online shop (please scroll below).
Orders are dispatched within 5-10 days from our Sydney factory. Flat Rate Australia-wide Shipping $15 (Western Australia $20 Shipping)
Premium Quality
Custom
Made
Made in Australia
Quick Turnaround
Description
DESCRIPTION
A 100% blackout fabric suitable for Vertical, Roller and Panel Blinds. The PVC free acrylic coating has anti-fade, easy clean and antifungal properties.
TECHNICAL INFO
Tested to AS1530 Part III
- Complies with Building Code of Australia requirements for Class 2-9 (a)
- Suitable for: Vertical, Roller, Panel
- Product comparison: Plain finish, Roller & Vertical
SPECIAL CARE
Fabric should be regularly dusted / vacuumed as appropriate and may be wet cleaned to remove grease or finger marks etc. Recommended cleaning agent is mild detergent in lukewarm water. Fabric may be sponged but severe rubbing should be avoided. White spirits may be used for spot cleaning; methylated spirits (ethanol) and dry cleaning solvent (Perc) must not be used. As usual, if commercial spot cleaners are used, then instructions regarding testing of an inconspicuous area should be followed.
WARRANTY
5 years
DISPATCH & DELIVERY
Orders are dispatched within 3-4 days from our Sydney factory. The total turn-around time for this process is estimated to be between 5 – 10 days Australia-wide..
HOW TO MEASURE
- Simply remove 1 slat from your window.
- Lay it flat and ensure it is as flat as possible to avoid any mismeasures.
- Using a measuring tape, start from the top edge of the slat, (do not include the Hanger at the top, please see image) measure down to the bottom edge of the slat.
- Take your reading from the tape measure and record it. This is the measurement you need to order your slats.
- Finally, you need to measure the width of your slat as shown in the image below. Measure the width using a tape measure. There are 3 standard widths available for slats. 127mm, 89mm and 100mm.
Additional information
| Type | Windows, Doors |
|---|---|
| Width (mm) | 127 mm, 89 mm |
| Colour | Angora, Arctic, Cayman, Chantilly, Cornsilk, Dolphin, Fawn, Harvest, Hippo, Lichorice, Luna, Mushroom, Mystique, Powder, Retreat, Ricepaper, Seashell, Spruce, Squirrel, Truffle, Walnut, Wedgewood, Cloud, Magma |
| Length (mm) | Up to 700mm, 700 to 1800mm, 1800 to 2300mm, 2300 to 2500mm, 2500 to 2900mm |
